Spirometer

Back

ML3500

The ML3500 Spirometer available for rental/hire or purchase...

This MicroLab Spirometer is developed specifically for the professional; it employs a precision Gold Standard Digital Volume Transducer which is especially suited to measuring very low flow rates in patients with COPD.The unit is highly portable and lightweight, and is ideal for use in a wide variety of situations.
With an in-built printer and high resolution LCD display it is the ideal, cost-effective solution to your spirometry requirements.

Features

High definition screen can display both Volume/Time and complete Flow/Volume Loops (using either the open or closed loop test techniques)
Measures up to 36 spirometry parameters
Storage: 1000 patient tests
Integrated high resolution printer
Text entry, enabling comment writing
Internationally recognised on-screen test quality assurance prompts
Predicted value and language selection
Fully customisable printout format
Lung age assessment and textual result interpretation
A comprehensive range of advanced features normally only seen on more expensive laboratory based equipment are included
An ergonomically designed unit of distinctive appearance, this spirometer is portable and lightweight
Rechargeable internal batteries

Specification

Measurements VC, FEV0.75, FEV1, FEV3, FEV6, FVC, PEF FEV0.75/VC, FEV0.75/FVC, FEV1/VC, FEV1/FVC, FEV3/VC, FEV3/FVC, FEV0.75/FEV6, FEV1/FEV6, MEF75, MEF50, MEF25, MEF25-75, FEF50/VC, FEF50FVC, MVVind, FET, MET, IC, FIV1, FIVC, PIF, FIV1,/FIVC, FIF25, FIF50, FIF75, FIF50/MEF50,VT, ERV, IRV [all expiratory measurements with baseline, post bronchodilator 1 and 2, % predicted, % change and normal range]
Test per subject VC-unlimited (best reported) FVC-unlimited (best 3 from baseline, post 1
and post 2 tests)
Predicted values Various - depends upon national preference
Transducer Gold Standard Bi-Directional Digital Volume
Resolution 10ml volume 0.03l/s flow
Accuracy ± 3% (to ATS recommendations)
Storage 1000 patients' tests including Flow/Volume loops and Volume/Time curves
Printer output 320 dot internal thermal printer, or serial output for all IBM Proprinter compatible Canon bubble jet printers e.g. BJC250, BJC4400, BJC80 and BJC50, and all PLC3 compatible Hewlett Packard printers e.g. Deskjet 420, 695, 340, 880C and 895Cxi
Display High resolution graphic LCD 240 x 160 pixels
Power supplier 100 - 240V 0.3A 47 - 63Hz. DC output 9V 0.8A
Battery pack Rechargeable NiCad 7.2V 600mA/hours
Dimensions 150h x 251w x 40d mm. Transducer 50 x 60 x 90mm
Weight Unit weight 0.75kg. Packed weight 2.55kg
Temperature 0 to +40 C
Operating humidity 30% to 90% RH
Storage temperature 0 to +70 C
Storage humidity 10% to 90% RH

This MicroLab spirometer is available for hire/rent for your clinical trial or is available on a purchase basis. They can be ordered with any other clinical trial, medical or laboratory equipment to create the most effective equipment management solution for your study.

Prices

Our range of Spirometry Equipment is available on a rental or purchase basis. Please click below to contact us for prices or further information.

Spirometer Rental - Spirometer Purchase

Specialists in spirometer hire/rental, spirometer sale and spirometer management.

Clinical Trial Outsourcing | Clinical Trials Equipment | Equipment Outsourcing