Ambulatory Infusion Pump


 The ambulatory infusion pump is a multi therapy pump suitable for many clinical settings, with three programmable modes including TPN, continuous and 25 step. The configurable modes of operation can be set to a speciality or patients understanding.

The unit is designed to be intuitive to program and use. With adjustable air-in-line detection and cumulative ultrasonic counter that can be set according to local protocols. The pump has variable occlusion pressure settings, configurable to the route of infusion or patient type. 

The pump can be used for ambulatory care in a carrying pouch, rucksack or mounted into a charger unit.

The Ambulatory Infusion Pump available for rental/hire or purchase


  • Lightweight and compact, suitable for use at the bedside or ambulatory use.
  • Delayed start infusion option requiring no further intervention once the pump is set up for infusion
  • Automatic occlusion alarm cancelling and infusion restart on resolution of inadvertent simple line kinking episodes
  • Built in event log records accurate and reliable data on pump use:
  • Lockable keypad to prevent inadvertent key presses
  • Fixed or variable code protected programmes can be locked into the pump memory
  • Post occlusion bolus reduction system will safely release pressure from the line, following an occlusion, without administering a post occlusion bolus 
  • Pump event log accessible via menu or download to PC through pump software


Flow Rate
0.1ml/h to 100ml/h in 0.1ml/h increments and 100ml/h to 1,200ml/h in 1ml/h increments
Volume Accuracy
+/- 5%
Adjustable Occlusion Pressure Settings
 Three alarm levels available and the default is Normal (720mmHg). Low - 360mmHg, Normal  - 720mmHg, High - 1,080mmHg
Pressure Accuracy
 +/- 155mm Hg (+/- 3psi)
Air Sensor
Ultrasonic, adjustable air bubble size. Air-in-line accumulation and single bubble detection
Air in Line Limits
0.04 ml to 2 ml
Priming Rate
100ml/h to 1,200ml/h in 1ml/h increments
KVO Rate
Rate (max) 5ml/h in 0.1ml/h increments, 0ml/h (default).                          Volume: (max) - 25ml
Stand By Time (pump paused)
 2 min before 'pump paused too long' alarm sounds
Total Time Setting
 99 hours 59 minutes
Battery / Battery Life
Rechargeable, Li-Polymer, 7.4V, 1800nAh (typical) 11.3 hours (average) infusing @ 350ml/h.  Battery Charging Time: 6-8 hours  
Mains and Battery Power Supply
AC Mains Power
Operating Temperature
Operating Humidity
+18° C to +45° C (+64° F to +113° F)
20% to 90% R.H. at +40C, non condensing
397g Pump with battery
114h x 90w x 40d mm



Our range of Infusion Systems including this Ambulatory Infusion Pump, are available on a rental, purchase or equipment management basis - please use the links at the top of the page to request a quotation.


Specialists in the supply and management of Infusion systems including Infusion Pumps


Clinical Trial Outsourcing | Clinical Trials Equipment | Equipment Outsourcing