The Clinispin CT20 Laboratory Centrifuge has been designed for quick production of PPP (platelet poor plasma) and PRP (platelet rich plasma) as well as other applications in the clinical or research laboratory.
The removable rotor of the Clinispin CT20 accepts 6 x 15ml tubes and with the adapters, will accommodate all common blood draw tubes. The variable speed allows for a variety of applications to be performed including:
A timer controls operation from 30 seconds to 30 minutes. The time can also be set to continuous by selecting the ‘On’ position, or by pressing and holding the start knob. The control panel of the centrifuge features easy to turn knobs and large digital displays for time and speed. During operation of the centrifuge, the lid is locked. Once the rotor has come to a stop, both the time and speed displays flash ‘00’ to signify that the run has been completed. The lid can now be opened by pressing the lid knob.
A small footprint allows the use of the Clinispin CT20 on even the most crowded bench. Its rugged construction will provide years of trouble free operation. The centrifuge can be operated on the bench or in a cold room.
|Speed Control||Digital - variable (100 RPM increments)|
|Max. Speed||6,500 RPM|
|Max. RCF||4,000 x g|
|Max. Capacity||6 x 15ml|
|Timer||30 sec to 30 min with continuous hold features|
|Acceleration Time||14 seconds|
|Deceleration Time||27 seconds|
|Voltage||120V or 230V|
|Frequency||5- 60 Hz|
|Dimensions||18h x 21w x 24d cm|
If you would like more information please call +44 (0) 1204 460446 or email firstname.lastname@example.org